| Ammonium Chloride (dry) |
Ammonium chloride powder is a high-purity, dry crystalline inorganic salt used to form clear brine used in workover and completion operations which require densities ranging from 8.4 to 9.2 lb/gal. It is also used at 2-4% concentration as a clay and shale stabilizer. |
| BUBBLE BUSTER |
BUBBLE BUSTER defoamer is a low-toxicity blend of defoaming agents formulated to control foaming in viscous brine systems or muds containing freshwater or seawater. |
| Calcium Bromide (dry) |
Calcium bromide powder is a single salt used to form clear brine workover and completion fluids. These fluids are used where formation pressures require densities from 8.4 to 15.3 lb/gal or where the inhibitive properties of a calcium fluid are required to prevent the hydration and migration of swelling clays. |
| Calcium Bromide (liquid) |
Calcium bromide brine, weighing 14.2 lb/gal as a stock fluid, is used for clear-brine workover and completion fluids ranging from 8.4 to 15.3 lb/gal or to be blended with heavier brines for higher density applications. |
| Calcium Bromide Brine System |
Calcium bromide brine systems are single-salt solutions used to form clear-brine workover and completion fluids with densities ranging from 8.4 to 15.3 lb/gal. |
| Calcium Bromide/Calcium Chloride Brine System |
Calcium Bromide/Calcium Chloride brine systems are two-salt solutions used to form clear-brine workover and completion fluids with densities ranging from 11.7 to 15.1 lb/gal. |
| Calcium Chloride (Dry) |
Calcium Chloride powder is a single salt used to form clear brine workover and completion fluids with densities ranging from 8.4 to 11.8 lb/gal. |
| Calcium Chloride (Liquid) |
Calcium chloride brine, weighing 11.6 lb/gal, is used for clear-brine workover and completion fluids ranging from 8.4 to 11.6 lb/gal or may be blended with heavier brines for higher density applications. Calcium chloride brine is also used to form non-damaging FLO-PRO drill-in fluids. |
| Calcium Chloride Brine System |
Calcium chloride brine systems are single-salt solutions of calcium chloride and water, with densities ranging from 8.4 to 11.6 lb/gal. |
| DI-ANTIFOAM |
DI-ANTIFOAM is a silicone-fluid emulstion that effectively controls foam in DIPRO systems mixed in calcium chloride, magnesium chloride, calcium bromide and zinc bromide brines. |
| DI-BALANCE |
DI-BALANCE is a fine-particle-size, highly reactive magnesium compound that interacts in a synergistic manner with DI-TROL to enhance the low-shear-rate viscosity (LSRV) of DIPRO systems mixed in calcium chloride, magnesium chloride, calcium bromide and zinc bromide brines. |
| DI-BOOST |
DI-BOOST is a water-miscible glycol ether that enhances the viscosity of DIPRO fluids mixed in calcium chloride, magnesium chloride, calcium bromide and zinc bromide brines. |
| DI-INHIB |
DI-INHIB is a neutralized blend of low-molecular-weight polyglycols that enhances the wellbore stability of DIPRO systems mixed in calcium chloride, magnesium chloride, calcium bromide and zinc bromide brines. |
| DI-TROL |
DI-TROL is a specially processed, high-molecular-weight, branched-chain starch derivative, that generates elevated low-shear-rate viscosity (LSRV) and controls filtrate loss in the DIPRO system. When used in conjunction with a bridging agent such as calcium carbonate, it provides a thin, pliable, easily removed filtercake. DI-TROL should be used in calcium chloride, magnesium chloride, calcium bromide and zinc bromide brines. |
| DUO-VIS |
DUO-VIS xanthan gum is a high-molecular-weight biopolymer used for increasing rheology in water-base muds and brine systems. |
| FLO-TROL |
FLO-TROL filtration-control additive is a special starch derivative used in FLO-PRO drill-in systems. When used in conjunction with a bridging agent such as sized calcium carbonate or sized salt, it provides a thin, pliable, easily removed filter cake. |
| FLO-VIS |
FLO-VIS premium-grade, clarified xanthan gum is the primary viscosifier for FLO-PRO systems. It produces elevated low-shear-rate viscosity and high, but fragile, gel strengths. These properties provide superior hole cleaning and suspension, improved hydraulics, reduced torque and drag, and assist in minimizing filtrate invasion. |
| FLO-VIS L |
FLO-VIS L is a high-yield, premium-grade, clarified xanthan gum, predispersed in a water-miscible, clay-free carrier fluid. It produces elevated LSRV and high, but fragile gel strengths. These properties provide superior hole cleaning and suspension, improved hydraulics, reduced torque and drag and assist in minimizing filtrate invasion. The low-toxicity carrier fluid assists in dispersion and helps prevent fisheyes so that the polymer rapidly and smoothly viscosifies without the need for high shear. FLO-VIS L is the primary viscosifier for FLOPRO and FLOPRO SF reservoir drill-in fluid systems. |
| KLA-GARD |
KLA-GARD shale stabilizer reduces the swelling of sensitive shales and drill cuttings exposed to water-base drilling and drill-in fluids. This high-quality, concentrated product has applications in a wide variety of mud systems and, with its low toxicity characteristics, can be used offshore. |
| POLYPAC |
POLYPAC polyanionic cellulose is a high-quality, water soluble polymer designed to control fluid loss and increase viscosity in water-base systems. |
| Potassium Chloride (dry) |
Potassium chloride powder is a high-purity, dry crystalline inorganic salt used to form clear brine used in workover and completion operations which require densities ranging from 8.4 to 9.7 lb/gal. |
| Potassium Chloride Brine System |
Potassium chloride brine systems are single-salt solutions of potassium chloride and water ranging in density from 8.4 to 9.7 lb/gal. |
| Potassium Formate (dry) |
Potassium formate powder is a high-purity, dry crystalline organic salt used to form clear brine used in workover and completion operations which require densities ranging from 8.4 to 13.1 lb/gal. |
| Potassium Formate Brine System |
Potassium formate brine systems are used to formulate solids-free workover and completion fluids ranging in density from 8.4 to 13.1 lb/gal. They eliminate the problems associated with precipitate formation that can occur when using calcium-based fluids in wells with high carbonate, bicarbonate or sufate concentrations. |
| SAFE-BREAK CBF |
SAFE-BREAK CBF emulsion preventer is a specialty solvent/surfactant blend that acts to prevent the formation of a stable emulsion between clear brine completion fluids and reservoir crude oil. |
| SAFE-BREAK L |
SAFE-BREAK L polymer breaker is a strong oxidizer used in water-base drill-in fluids as a breaker for various polymers. In addition to breaking the viscosity of natural polymer-base fluids, it also loosens the filter cake developed by drill-in fluids, so that the bridging particles from the filter cake can be produced back through sand control liners or be more effectively acidized. |
| SAFE-BREAK ZINC |
SAFE-BREAK ZINC emulsion preventer is a blend of surfactants and solvents designed to prevent the formation of a stable emulsion between clear-brine completion fluids containing zinc bromide or a formate salt and reservoir crude oil. It is formulated to penetrate the formation with minimal adsorption and to provide the intended benefit to the leading edge of the invading fluid. |
| SAFE-BUFF 8 |
PRODUCT BULLETIN: SAFE-BUFF 8 is an alkaline earth metal oxide designed to be used as a pH buffer in water-base drilling and completion fluids. |
| SAFE-CARB |
SAFE-CARB ground marble is a high-purity, acid-soluble, calcium carbonate used as a bridging and weighting agent in drilling, drill-in and workover/completion fluids. It is preferred over limestone because it is generally more pure with a higher hardness. |
| SAFE-COR |
SAFE-COR corrosion inhibitor is a modified, amine-type additive designed to protect all oilfield tubular goods. SAFE-COR helps prevent general corrosion attack on casing, tubing and downhole tools in contact with clear completion brines. |
| SAFE-COR C |
SAFE-COR C corrosion inhibitor is a modified, amine-type additive designed to protect all oilfield tubular goods. It is a highly concentrated product designed and packaged for use in clear workover and completion brines. |
| SAFE-COR E |
SAFE-COR E corrosion inhibitor is a modified amine-type additive formulated to protect all oilfield tubular goods, for solubility in clear brine completion fluids and to minimize environmental impact. |
| SAFE-COR HT |
SAFE-COR HT high-temperature corrosion inhibitor is an inorganic thiocyanate-base additive designed to protect all oilfield tubular goods. Although SAFE-COR HT was developed for use in fluids with a temperature range from ambient to 450°F, it is particularly applicable for temperatures in the 250 to 400°F range. |
| SAFE-DFOAM |
SAFE-DFOAM defoamer is a blended alcohol-based additive designed to reduce foaming and prevent entrained air in all fluids. It is made with higher alcohols. SAFE-DFOAM foam reducer is very effective in all completion fluids as well as water-base drilling fluids - freshwater, brackish, seawater, saltwater and saturated saltwater. |
| SAFE-FLOC I |
SAFE-FLOC I flocculant and filtration aid is a blend of ionic and non-ionic surfactants, flocculants and high-flash-point solvents designed to flocculate and suspend insoluble iron solids. |
| SAFE-FLOC II |
SAFE-FLOC II flocculant and filtration aid is a blend of surfactants and solvents designed to suspend solids in oil-base mud and transport them from the well. Solids from the drilling mud, pipe dope and mineral scale are made oil-wet and emulsified. SAFE-FLOC II also acts to flocculate dispersed mud solids in a completion fluid and float the solids to the surface of a holding tank. This allows the fluid below the surface to be filtered at a much faster rate and with longer filtration cycles. |
| SAFE-SCAV CA |
SAFE-SCAV CA oxygen scavenger is an organic sulfur-free additive for use in calcium-base brines and in seawater. It is a fast-acting material which is effective even at low temperatures. |
| SAFE-SCAV HS |
SAFE-SCAV HS hydrogen sulfide scavenger is brine soluble and remains soluble after reacting with H2S. Based on an organic chemical in place of the typical zinc- or iron-based compound, it provides a solids-free solution to H2S intrusion. |
| SAFE-SCAV NA |
SAFE-SCAV NA oxygen scavenger is a liquid bisulfite-base additive designed to be used in sodium- and potassium-base brines. It reacts with and eliminates dissolved oxygen as a possible source of corrosion in workover and completion fluids as well as packer and drilling fluids. |
| SAFE-SCAVITE |
SAFE-SCAVITE scale inhibitor is a concentrated, phosphonate-base system that inhibits scaling due to calcium carbonate, calcium sulfate and barium sulfate. |
| SAFE-SOLV OE |
SAFE-SOLV OE is a non-flammable, environmentally friendly blend of solvents used to displace/remove oil- or synthetic-base mud and solids. It is designed to soften, dissolve and suspend pipe dope, paraffin wax, asphaltenes and heavy crude oil deposits on tubular surfaces or on the wellbore surface that could interfere with production. |
| SAFE-SURF O |
SAFE-SURF O well cleaner is a concentrated blend of surfactants, solvents and powerful water-wetting agents designed to clean up and displace oil- and synthetic-base muds and solids. |
| SAFE-SURF OE |
SAFE-SURF OE well wash is a blend of non-ionic surfactants and powerful water-wetting agents designed to clean up and displace oil- and synthetic-base muds and solids. |
| SAFE-SURF W |
SAFE-SURF W displacement chemical is a surfactant-based detergent, formulated to remove water-base drilling mud and residue from casing, pipe and surface equipment. This high-pH, strong water-wetting cleaner helps displace mud and solids from tubulars to ensure a clean wellbore is obtained for the completion fluid displacement. |
| SAFE-SURF WE |
SAFE-SURF WE well wash is a blend of non-ionic surfactants used to clean up and displace water-base mud and solids. This strong water-wetting cleaner ensures a clean wellbore is obtained for the completion fluid displacement. It disperses filter cakes efficiently with low environmental impact. |
| SAFE-SURF WN |
SAFE-SURF WN displacement wash chemical is a blend of anionic and non-ionic glucose-base surfactants, formulated to remove water-base drilling mud residue and oil-mud film from casing, pipe and surface equipment. This strong water-wetting cleaner helps displace mud and solids from tubulars to ensure a clean wellbore is obtained for the completion fluid displacement. |
| SAFE-VIS |
SAFE-VIS hydroxyethylcellulose viscosifier is a non-ionic, modified high-molecular-weight natural polymer. This easily breakable, non-fermenting polymer will increase viscosity and carrying capacity of workover and completion fluids and heavy brines and is not adversely affected by polar compounds or divalent cations such as calcium and magnesium or by cement contamination. |
| SAFE-VIS E |
SAFE-VIS E liquid viscosifier is a suspension of high-quality hydroxyethylcellulose polymer in a synthetic carrier. |
| SAFE-VIS HDE |
SAFE-VIS HDE liquid viscosifier is a suspension of high-quality hydroxyethylcellulose polymer in a synthetic carrier that is specially formulated for increasing the viscosity of |
| SAFE-VIS OGS |
PRODUCT BULLETIN: SAFE-VIS OGS liquid viscosifier is a suspension of high-quality HEC polymer in an "environmentally friendly" synthetic carrier. |
| Sodium Bromide (dry) |
Sodium bromide powder is a single salt used to form clear brine workover and completion fluids with densities ranging from 8.4 to 12.8 lb/gal. |
| Sodium Bromide (Liquid) |
Sodium bromide brine, weighing 12.5 lb/gal, is used as a clear-brine workover and completion fluid for densities ranging from 8.4 to 12.5 lb/gal as an alternative to calcium-based brines where formation waters contain high concentrations of bicarbonate and sulfate ions. Sodium bromide brine may also be used to form non-damaging FLO-PRO drill-in fluids. |
| Sodium Chloride (dry) |
Sodium chloride, a widely available commercial chemical, is an economical product for formulating clear, solids-free workover and completion fluids to 10 lb/gal. |
| Sodium Formate (dry) |
Sodium formate powder is a high-purity, dry crystalline organic salt used to form clear brine used in workover and completion operations which require densities ranging from 8.4 to 11.0 lb/gal. |
| Zinc Bromide/Calcium Bromide (liquid) |
Zinc bromide/calcium bromide brine is used for clear-brine workover and completion operations which require high-density fluids and can be blended with lower density brines for specific density and crystallization point applications. |
